Archive for 2011

MV Rhea Almost Sinks In Harbour, 1972

This story was submitted by Vernon A.C. Mills, a cadet in post-war service aboard the ship. Thanks Vern!

Being the following incident has happened many years ago, I will try to be as accurate as possible. It would be best to keep in mind that at the time, I was only 15 years old, therefore everything seemed so critical and disastrous. In all honesty, I can’t remember if the winter of 1971–1972 was particularly bad or not, after that amount of time the best I can say is, “I’ve had a sleep since then” and winter is winter.

It was during the very early spring thaw that a fairly large log had floated downstream on the Talbot River through Port Stanley, Ontario and somehow managed to get jammed between the pier and port side of the ship. Due to the strong current of the river and high winds, the constant rocking and sway of the ship, a fairly large hole had been punched into the hull right at the water line on the port side slightly forward of amidships. I believe it was Lieutenant Harrington, who at the time was at his place of employment, had been notified that the Rhea was sitting low in the water and had a noticeable list. Read the rest of this entry »

Sorting Through Contributions

Taking a break from my grandfather CDP’s letters and such, I’ve been going through the photos and stories you have been sending me to contribute. I am very thankful for them! The last few posts are bits of that. I also have a post-war story from Vernon to review and post.

After posting the muster roll, out of curiosity, I Googled each of the names to contact a few genealogy hits and let them know about this site. Maybe it will lead to some other photos or war trinkets. I am also holding out hope that I run into someone who is still alive…but that window of opportunity is quickly vanishing.

Stay tuned!

YMS-135 Subclass Microfiche Blueprints

I somewhat crudely pieced together the partial scans of the ship’s blueprint. Here it is in totality, though the scans given to me where warped in places, so the measurements are likely not quite perfect. These came from copies of what appear to be microfiche film.

I plan to try and get my hands on better copies of these plans from the National Archives in the near future. Click through for as high of resolution as I have thus far.

YMS-135 Subclass; Blueprint

YMS-135 Subclass; Blueprint

YMS-304 3D Rendering & Microfiche Blueprints

I tracked down the source of a digital 3D model of the YMS-304 this week. The artist was gracious enough to give me a copy of the file, as well as copies of some blueprints for the YMS-135 subclass that came from the Naval archives!

I’d give personal credit to the artist, but I need to clarify if he would like me to, as the model was put together for a paid project. If I end up using it for anything commercial, I’ll have to get permissions.

So, what do I plan to do with such a great find?

Well, at the moment, not too much. The 3D model lets me pan and rotate the ship so I can get more intimate with its layout, but it is only an exterior model at the moment. I’m in the process of scheduling some Naval archive visits to get more blueprints, because I’d like to add more detail to the 3D model, then build out the interior for some digital walk-throughs. I can’t imagine how amazing it would be to virtually walk around inside of the ship, eventually even adding textures and materials to make it seem life-like. Time to sharpen up those rusty CAD skills!

Here is a quick screenshot of part of the model:
YMS-304 3D Rendering

YMS-304 3D Rendering

The YMS-304 is a near sibling of the YMS-299. Of the same subclass, the same blueprints were used in their manufacturing. The only differences between them would be minor in the construction process, as only YMS-299 to YMS-302 were built by the same builder.

Here is a sample portion from one of the blueprints:
YMS-135 Subclass; blueprint sample

YMS-135 Subclass; blueprint sample

Update: I added the full, stitched-together set of blueprints to this post.

Silent Defenders Patch/Logo/Insignia

I had trouble finding any good versions of the Silent Defenders logo, so I went ahead and recreated it in vector format. You may download it for your own use at the bottom of this post.

Silent Defenders patch logo

Silent Defenders patch logo

 

M.V. Rhea Tally Cap, Shoulder Flash and Stories

In correspondence with Vernon “Vern” A.C. Mills, he’s been giving me some more bits of information about the post-war doings of the ship as a cadet training facility. Among his saved trinkets are a cap tally (a band that would have been worn around a sailor’s hat) and a shoulder flash (patch). Thank you to Vern for sharing these!

M.V. Rhea cap tally (band) and shoulder flash (patch); 1970s

M.V. Rhea cap tally (band) and shoulder flash (patch); 1970s

Vern served on the ship in the 1970s, alongside Charles Donaldson, the other former cadet whom has sent me a great number of photos of the ship.

Vern also pitched in this humorous bit of information:

I just remembered something that will give you one hell of a good laugh. During my time on the Rhea, I always worked in the galley with another guy named Brian Shuart. It was Brian who got the rest of the crew and even the officers to call me, “Captain Heartburn”.  Oh yeah, my culinary skills have improved since then. (I think)

 

M.V. Rhea Cadet, Vern Mills

I’m here! I apologize for the delay in posts. The holidays were a whirlwind and I’m just getting back to going through the documents again.

I’ve been contacted by another post-war cadet from the 70s. I’ll see if he has anything great he’s willing to share with us. I’m particularly interested in the interior of the ship lately, only because I have no photos of it.

I recently found a blueprint for the ship, as well as a model-maker who does custom WWII ships. The model-maker has made sibling boats of the YMS-299, so I’d like to get my hands on a fairly accurate model of the ship with gun turret placement and all. That would help me paint a more clear picture of battle, when my grandfather talks about what gun he was using and where chaos was happening around him.

To Vern, I have a number of other documents/stories from Charles regarding the cadet service. I’ll work on getting them posted quickly for you.